Concrete Admixture

High Range water reducing and high workability retaining concrete admixture ; confirms to ASTM C 494 – 99/99a Type F&G and BS 5057 part3.

To produce free flow concrete with low water content with high workability, retention capacity and high early strength for slabs, foundations, walls, columns, piers and slender components with densely packed reinforcement; concrete elements with textured surface finishes; suitable for high ambient temperature application.

Maruti Plast SR is a brown chloride free liquid is based on a hydro carboxylic acid derivative which instantly disperses in water. Maruti Plast SR disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. This effect can be used to improve workability, to increase ultimate strengths or to facilitate a reduction in the cement content.

The retarding properties of Maruti Plast SR can also be beneficial in concrete where high cement content or high temperatures are involved. Cold joints in continuous pours may be avoided and the use of lower cement contents will reduce heat of hydration. Maruti Plast SR 100 is particularly suitable for cohesive and cement rich mixes. For lean mixes which are prone to segregation Maruti Plast SR may prove more suitable.

To produce high quality superplasticisers differentiated from conventional superplasticisers in that it is based on a unique melamine based.

To produce high quality superplasticisers differentiated from conventional superplasticisers in that it is based on a unique carboxylic ether polymer with long lateral chains.

Versatile and economical concrete plasticizes and waterproofing compound ; conforms to IS9103 – 1999 (amended 2003 ), ASTM C 494-99/99a Type F&G To produce high quality concrete for exposed surfaces, in difficult placing conditions, where poor quality aggregates are found/used,for precast elements and for piling.

A single pack powdered admixture which, when added to cement (cement : sand) produces a easy flow, high strength, shrinkage compensating grout.

“Maruti Flow ADD is a plasticizing, shrinkage compensating grout additive, Ideally suited for grouting and in-filling where a non-shrink, free flowing product is required. It imparts super plasticizing / high water reducing properties as well as positive expansion.

Liquid Integral waterproofing compound and mortar admixture.

Maruti Plast IWP is recommended for use in structural and mass concrete, particularly for the following Casting of roof slabs, DPC, Beams, Columns, Water tanks, Culverts, Tunnels, Sewerage works, Virtually whatever watertight concrete is required, Excellent for internal and external plaster of buildings etc. Repair and renovation.

Integral Waterproofing cum corrosion inhibitor for concrete & Plaster.”Maruti Plast LW+ is specially formulated integral liquid / Powder waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.

Ready to use highly concentrated air entraining concrete admixture; conforms to ASTM C 260-81.To produce easy workable and durable concrete for roads and runways.

Foaming Agent to produce porous, lightweight concrete with thermal insulation properties MARUTI PUMP LUBE ideal for pumping aid for concrete Pumps to assure pumpability of concrete with variable fine content, unsatisfactory aggregate grading, poor water retention etc.; to reduce mechanical wear of pump and pipes. Dissolved in water lubricates the pipe wall and facilitates problem free pumping.

Ideal for pumping aid for concrete Pumps to assure pumpability of concrete with variable fine content, unsatisfactory aggregate grading, poor water retention etc.; to reduce mechanical wear of pump and pipes. Dissolved in water lubricates the pipe wall and facilitates problems free pumping.